Instant hot water when you turn on the tap saves you water, money, and in many cases energy; a green home improvement tip and product to improve your life!
Home improvement project – install a Chilipepper appliance and start saving time, water, energy, and money, and help protect the environment at the same time!
A typical family of four can save over 10,000 gallons of water per year! Great for drought stricken areas!
When you want hot water, you simply push a button and the Chilipepper quickly pumps hot water from your water heater to your fixtures without running water down the drain.
When you hear the pump shut off you have instant hot water at the fixture.
The cooled off hot water in the hot water pipes is pumped back to the water heater through the cold water line. When hot water reaches the Chilipepper it shuts off so hot water does not get into the cold water piping. Details of how it works.
- Instant hot water saves you time
- Less water run down the drain saves you water and money
- No plumbing required, hooks up under the sink with just hoses!
- Works with any water heater, even all brands of tankless heaters
- Full 30 day money back guarantee! If for any reason you are not satisfied, return your Chilipepper for a complete refund!
- Consumes less than $2.00 worth of electricity per year to operate.
The Chilipepper works with any kind of water heater including tankless water heaters.
Stop Waiting For Your Slow Hot Water – Get It Faster With The Chilipepper Hot Water Demand System
The Chilipepper is a small, powerful, micro-processor controlled pump that mounts under your sink It pumps the hot water from your water heater through your hot water pipe and returns the cold water that was in the hot water piping through the cold water pipe back to the water heater.
When hot water reaches the pump, the pump automatically shuts off. When you hear the pump shut off your hot water is waiting for you instead of you waiting for it! If you press the start button and there is still hot water left in the hot water piping, the Chilipepper will start up and run for one half second, and then shut off, letting you know that there is already hot water in the pipes.
Saving water, energy, and helping preserve the environment makes this a green home improvement tip!
After you install your Chilipepper you will feel good whenever you use your hot water. You are saving water and helping preserve the environment.
By reducing your water consumption you reduce the energy required to pump and treat the water and thus reduce greenhouse gasses released into the atmosphere while generating that energy.
In many areas sewage costs are based on your water consumption, therefore by saving water you spend less on your sewer bill.
The Chilipepper can improve your dishwashers performance. The most common cause of poor dishwasher performance is water that is not hot enough on the first fill cycle. When the water isn’t hot enough, it doesn’t completely dissolve the dishwashing detergent resulting in poor dishwasher performance.
When you have a Chilipepper, just press the button before running your dishwasher, and your dishwasher will work at peak performance.
If you have a septic system, a Chilipepper will reduce the sewage flowing into the system increasing its life.
The Chilipepper comes complete with a push-button. Or if you prefer, wireless operation from any room is easy with the wireless remote option. By using an x-10 remote receiver with your Chilipepper you can control it with any compatible x-10 product such as remote switches or motion detectors.
By following this home improvement tip, you don’t have to stand around waiting for the hot water any more! Start saving time, water, energy, and money…get a Chilipepper today.