Call Us Today! (775)-359-1223|

DIY Green project 2

/DIY Green project 2
DIY Green project 2 2018-08-13T11:35:33+00:00

Great green do it yourself project that’s quick, easy, inexpensive, and provides you with the convenience of quick hot water while saving you time, water, and money!


Designed for the DIY enthusiast…Easy to install

The Chilipepper was designed for very easy installation just so that you would not need to call a plumber. The plumbing connections are all made with hoses… no soldering required.

You do need a 110 volt electric outlet to plug it into.

  • The Chilipepper appliance is inexpensive and easy to install!
  • All plumbing connections are made with hoses.
  • At the touch of a button your hot water is pumped rapidly to your sink or shower.
  • Nothing gets run down the drain, saving you thousands of gallons of water per year!
  • Full 30 day money back guarantee! If for any reason you are not satisfied, return your Chilipepper for a complete refund!
  • Consumes less than $2.00 worth of electricity per year to operate.

Works with any kind of water heater from solar to tankless, and tank water heaters too of course!

The Chilipepper small appliance works with any kind of water heater including tankless and solar water heaters. Because the Chilipepper pumps the hot water from the water heater at 2-1/2 to 3 gallons per minute, it will turn on tankless water heaters which only require about 1/2 gallon per minute to turn on.

The Chilipepper is a small, powerful, micro-processor controlled pump that mounts easily under your sink.  It pumps the hot water from your water heater through your hot water pipe and returns the cold water that was in the hot water piping through the cold water pipe back to the inlet of the water heater.

When hot water reaches the pump, an internal temperature sensor senses the hot water and the micro processor  automatically shuts off the pump.  When you hear the pump shut off your hot water is waiting for you instead of you waiting for it!  If you press the start button and there is still hot water in the piping from a previous use, the pump will start up and run for one half second, letting you know that there is already hot water in the piping.

Depending on your plumbing layout, you may be able to get instant hot water from more than one sink!

In many cases your house plumbing system allows you to provide quick hot water to several, or even all of the sinks and other fixtures in your home with just one Chilipepper.

If you live in an area where water is expensive or where there are water shortages or a drought, the  Chilipepper can pay for itself in water and energy savings in as little as 6 months!

Be a green do it yourselfer and feel good when you use your hot water!

After you install your Chilipepper you will feel good whenever you use your hot water.  You are saving water and helping preserve the environment.

Your dishwasher will work better if it gets hot water on the first fill cycle, so a Chilipepper can improve your dishwasher performance if you run it just before starting your dishwasher.

In many areas sewage costs are based on your water consumption, therefore by saving water you spend less on your sewer bill.

If you have a septic system, a Chilipepper will reduce the sewage flowing into the system increasing its life.

The Chilipepper comes complete with a push-button. Or if you prefer, wireless operation from any room is easy with the wireless remote option.

You don’t have to stand around waiting for the hot water any more! Start saving time, water, energy, and money…get a Chilipepper today. Do it yourself!