A green plumbing product, this unique kitchen gadget is a water conservation product that saves you water, time, and money plus you get nearly instant hot water at your kitchen sink!
Unique kitchen gadgets – The Chilipepper Appliance
Looking for interesting kitchen gadgets?
With one of these gadgets, you can add the convenience of quick push-button hot water to your kitchen and bathrooms and you save thousands of gallons of water a year.
The Chilipepper is a small, powerful, micro-processor controlled pump that mounts quickly and easily under your kitchen or bathroom sink.
It pumps the hot water from your water heater through your hot water pipe to your fixtures, and returns the cold water that was in the hot water piping but cooled off since the last time it was used, through the cold water pipe back to the inlet of the water heater.
When you want hot water, you simply press the start button, and the Chilipepper springs to life pumping hot water to your sink from your water heater at 1-2/2 to 3 gallons per minute. Much faster than letting the faucet run if you have low flow fixtures, and most homes do these days.
When hot water reaches the pump, it is sensed by an internal temperature sensor which signals the micro processor, which automatically shuts the pump off. When you hear the pump shut off your hot water is waiting for you instead of you waiting for it!
Once the pump detects water temperature over 100 degrees, it won’t start until the temperature drops below 100 degrees. If you push the start button the Chilipepper will run for 1/2 second and then shut off, letting you know that there is already hot water in the line.
By saving you water and energy, the Chilipepper can pay for itself in as little as six months…how many kitchen gadgets can say that?
- The Chilipepper kitchen gadgets appliance is inexpensive and easy to install!
- At the touch of a button your hot water is pumped rapidly to your sink or shower.
- No water gets run down the drain, saving you thousands of gallons of water per year!
- Full 30 day money back guarantee! If for any reason you are not satisfied, return your Chilipepper for a complete refund!
- Consumes less than $2.00 worth of electricity per year to operate.
In many cases your house plumbing system allows you to provide quick hot water to several, or even all of the kitchen sinks, bathroom sinks and other fixtures in your home with just one Chilipepper installed at the fixture furthest from your water heater.
After you install your Chilipepper you will feel good whenever you use your hot water. You are saving water and helping preserve the environment. By reducing your water consumption you reduce the energy required to pump and treat the water and thus reduce greenhouse gasses released into the atmosphere while generating that energy.
If you have a septic system, a Chilipepper will reduce the sewage flowing into the system increasing its life.
The Chilipepper comes complete with a push-button, and all of the plumbing fittings and tubing you need to install the Chilipepper under any sink. Remote operation from any room is easy with the x-10 remote option.
You don’t have to stand around waiting for the hot water any more! Start saving time, water, energy, and money… install a green plumbing product that is also a water conservation and energy saving product, a Chilipepper hot water demand system.